Izdelki za oprema za modele (133)

This backpack is made from top-quality, waterproof material by REACH international quality standards. We have over 20 colors of material and we are able to print material in digital customer wishes. This presents a large printing ability because there is no limit in the graphic design materials. Dimensions:33 x 54 x 28 cm Volume:49 liters Material:Polyester 600d - REACH

This backpack is made from top-quality, waterproof material by REACH international quality standards. We have over 20 colors of material and we are able to print material in digital customer wishes. This presents a large printing ability because there is no limit in the graphic design materials. Dimensions:47 x 35 x 15 cm Volume:24 liters Material:Polyester 600d - REACH

This backpack is made from top-quality, waterproof material by REACH international quality standards. We have over 20 colors of material and we are able to print material in digital customer wishes. This presents a large printing ability because there is no limit in the graphic design materials. Dimensions:52 x 35 x 23 cm Volume:40 liters Material:Polyester 600d - REACH

This backpack is made from top-quality, waterproof material by REACH international quality standards. We have over 20 colors of material and we are able to print material in digital customer wishes. This presents a large printing ability because there is no limit in the graphic design materials. Dimensions:47 x 30 x 21 cm Volume:28 liters Material:Polyester 600d - REACH

This backpack is made from top-quality, waterproof material by REACH international quality standards. We have over 20 colors of material and we are able to print material in digital customer wishes. This presents a large printing ability because there is no limit in the graphic design materials. Dimensions:47 x 35 x 15 cm Volume:24 liters Material:Polyester 600d - REACH

This backpack is made from top-quality, waterproof material by REACH international quality standards. We have over 20 colors of material and we are able to print material in digital customer wishes. This presents a large printing ability because there is no limit in the graphic design materials. Dimensions:45 x 36 x 24 cm Volume:38 liters Material:Polyester 600d - REACH

It meets all the requirements of the modern ballistic helmet for the military. The helmet is lightweight due to the elimination of the ear cover, which allows for better hearing localization and compatibility with communication headsets. The helmets are designed to withstand very minor trauma, tested with shrapnel and pistol ammunition. - Excellent ballistic protection against a wide range of fragments and projectiles. - Balance between penetration resistance and low dynamic deflection. - Good adhesion to resin Ballistic resistance insensitive to: - temperatures between -52° and +70° - immersion in seawater - Wide range of chemicals and cleaning agents Aramid is flame and heat resistant. It does not melt or drip, does not sustain flames and has low smoke toxicity The helmet is compatible with : - Gas masks - Goggles and ballistic masks -Hearing protection and communication systems. BUCKLE :PRESSUR STRAP UNDER THROAT:a 4 punti MATERIAL:100% aramid

An accurate and consistent method to install virtually any Compression Limiter into plastic applications requiring up to 4.5kN (1000 lbs). Install just one Compression Limiter into one assembly, or several Limiters across multiple assemblies simultaneously for increased productivity. The Model CP’s quick-change tooling creates the flexibility to adapt the platform to a variety of products within seconds. The Model CP has a 230mm x 280mm (9”x11”) work area and is built on a rigid steel frame with high-precision shafting and linear bearings resulting in smooth operation, precise positioning, repeatability, and durability. The Model CP is available with optional enhancement features for error-proofing and maximum efficiency.

AVEC SA MOUSSE HR MI FERME, LE REPOSE PIEDS/POUF CINÉO PEUT SERVIR D’ASSISE D’APPOINT. PRATIQUE ET CONFORTABLE! GRACE À LA FABRICATION SUR MESURE, VOUS AVEZ LA POSSIBILITÉ D’ASSORTIR AVEC LE MÊME REVÊTEMENT L’ENSEMBLE DE NOS FAUTEUILS FIXES/MOTORISÉS ET REPOSE PIEDS/POUF. UGS :PGMCTAS POIDS:5000 kg DIMENSIONS:52 × 41 × 48 cm

It is supplied with or without fixing ring nut code 9924 and on request with: closing cap code 9912 sealing gasket code 0101 Standard Material: ABS - White Color On demand and for lot-size à at least 1.000 pcs. it can be supplied in following materials: PA6 - Nylon, white color (10107/N/1) PEMP - Polyethylene (10107/1/P) Material:ABS - white color

The Dr. Tunica Short medical gown is the most practical and popular type of medical gown you can choose, especially for an energetic person like you, with a dynamic lifestyle that is always on the move Material:cotton 35% polyester 65% Weight:180-185 gr/m2 Dimensions:dimensions depend on the selected size Length:62 cm - 70 cm Closure:staples Washing temperature:40⁰ C Calcining temperature:average, 150⁰ C

AVEC SA MOUSSE HR MI FERME, LE REPOSE PIEDS/POUF CINÉO PEUT SERVIR D’ASSISE D’APPOINT. PRATIQUE ET CONFORTABLE! GRACE À LA FABRICATION SUR MESURE, VOUS AVEZ LA POSSIBILITÉ D’ASSORTIR AVEC LE MÊME REVÊTEMENT L’ENSEMBLE DE NOS FAUTEUILS FIXES/MOTORISÉS ET REPOSE PIEDS/POUF. UGS :PGMCSCVU POIDS:7 kg DIMENSIONS:55 × 41 × 42 cm

This versatile installation machine is suited for moderate to high production applications requiring up to 1.3 kN (300 lbs.) of installation force. The pin insertion head advances and retracts for ease of loading and unloading of the components to be pinned. The machine’s insertion bushing is positioned close to the part for smooth installation. A vibratory feeder and orientation head transfers the pin from the feeder bowl to the installation position, eliminating the need for the operator to handle the pins. A quick-clear mechanism allows for easy clearing of the feed tube without the need for tools when changing pin size or performing maintenance.

The Dr. Rever Long medical gown for men has three generous pockets. Two are arranged in the lower part and one in the upper part, in the chest area. These will prove to be very useful on days with intense activity because they give you the opportunity to keep your phone, stethoscope and other important medical items close at hand, while your hands remain free Material:cotton 35% polyester 65% Weight:180-185 gr/m2 Dimensions:dimensions depend on the selected size Length:62 cm - 70 cm Closure:staples Washing temperature:40⁰ C Calcining temperature:average, 150⁰ C

DISTRIBUTOR

Red Velvet Cake - Lamour De Paris SKU:900901 we:4, 4 lb / 2000 gr st:3 days at room refrigerator

PGD ​​2207

It is used for vertical transportation of wheat. It consists of two parts: lower and upper heading. Pipe length is adjusted according to the building height. The drive of the elevator is made by the reducer motor located on the upper head. The motor stand has slides and can be easily adjusted to enable shaft center adjustments. Belt tension is provided by the tensioning mechanism connected to the bearings.

AVEC SA MOUSSE HR MI FERME, LE REPOSE PIEDS/POUF CINÉO PEUT SERVIR D’ASSISE D’APPOINT. PRATIQUE ET CONFORTABLE! GRACE À LA FABRICATION SUR MESURE, VOUS AVEZ LA POSSIBILITÉ D’ASSORTIR AVEC LE MÊME REVÊTEMENT L’ENSEMBLE DE NOS FAUTEUILS FIXES/MOTORISÉS ET REPOSE PIEDS/POUF. UGS :PGMCTALN POIDS:7 kg DIMENSIONS:55 × 41 × 42 cm

AVEC SA MOUSSE HR MI FERME, LE REPOSE PIEDS/POUF CINÉO PEUT SERVIR D’ASSISE D’APPOINT. PRATIQUE ET CONFORTABLE! Grace à la fabrication sur mesure, vous avez la possibilité d’assortir avec le même revêtement l’ensemble de nos fauteuils fixes/motorisés et repose pieds/pouf. UGS :PPMCCINN POIDS:15 kg DIMENSIONS:45 × 30 × 38 cm

LOMBARDINI MODELLO LGA 184,LGK 184 CODICE ORIGINALE:359.129.300

LOMBARDINI MODELLO LGA 184,LGK 184 CODICE ORIGINALE:359.129.300

Visualizzatore di quote compatto liberamente programmabile. A scelta si possono visualizzare le posizioni di sistemi di misura incrementali, i numeri di giri o i numeri dei pezzi, in combinazione con i sensori di prossimità di uso comune o le barriere fotoelettriche. Incrementale, misurazione lineare, angolare, n. di giri o n. di pezzi. Display a LED (1 riga a 5 caratteri). Ingressi per sensori incrementali, misurazione lineare e angolare, n. di giri o n. di pezzi. Liberamente programmabile mediante tastiera frontale. Funzione dimensione incrementale (modo operativo I), memoria valori reali (modo operativo I e S). Con connessione di riferimento. Abilitazione alla programmazione mediante ingresso esterno (interruttore a chiave). Modello compatto.

DISC DIAMETER is 660/520/420 mm. CHEWING WIDTH .228 mm TOTAL WIDTH .290 mm PALLETLING AREA .4727cm2 DISC WITH CONICAL RINK AND BOLT INTERNAL SPEED .6,9 m/secROLL DIAMETER .320 mm.ROLL WIDTH .232 mm DOUBLE ROLLER .BELT PULLEY TRANSMISSION and TWIN MOTOR 15* 15 TOTAL 30 PIECES V BELT DRIVEN MAIN MOTOR 2 PIECES 110 KV 1000 rpm .PELLET CELL 304 QUALITY STAINLESS STEEL PELLETIZING CELL SAFETY SWITCH .FIXED MAGNET .1 PIECE CHROME STEEL XT 86,day WITH DRILLING METHOD DRILLED VACUUM HARDENED AND TURNED-ISO 9002 QUALITY CERTIFIED PELLET PRESS DISC 1 SET COMPLETE ROLL.

Capteur à câble universel pour mesures linéaires de 6000 mm max., conception robuste et guidage de câble précis et sûr ; prêt à l'intégration de codeurs rotatifs les plus divers avec bride standard de 58 mm. Modèle robuste. Montage simple. Mesure linéaire 6000 mm max. Codeur incrémental ou absolu. Boîtier aluminium et plastique. Grande souplesse en raison du choix individuel de codeurs à bride standard 58 mm. Différents types de câbles.

PGD 3313

The three external pockets of the Dr. Tunica Summer men's robe, two arranged in the lower part and one in the upper part, give you the freedom to keep your hands free while you have your phone, stethoscope and other important medical items close at hand. The three pockets will prove very useful on days with intense activity. Material:cotton 35% polyester 65% Weight:180-185 gr/m2 Dimensions:dimensions depend on the selected size Length:62 cm - 70 cm Closure:staples Washing temperature:40⁰ C Calcining temperature:average, 150⁰ C

AVEC SA MOUSSE HR MI FERME, LE REPOSE PIEDS/POUF CINÉO PEUT SERVIR D’ASSISE D’APPOINT. PRATIQUE ET CONFORTABLE! GRACE À LA FABRICATION SUR MESURE, VOUS AVEZ LA POSSIBILITÉ D’ASSORTIR AVEC LE MÊME REVÊTEMENT L’ENSEMBLE DE NOS FAUTEUILS FIXES/MOTORISÉS ET REPOSE PIEDS/POUF. UGS :PPMCSCVU POIDS:5 kg DIMENSIONS:45 × 30 × 38 cm

Modell CP Pneumatische Installationsmaschine für Compression Limiter Eine genaue und einheitliche Methode zur Installation praktisch aller Compression Limiter in Kunststoffanwendungen, die eine Kraft von bis zu 4,5kN erfordern. Installieren Sie nur einen Compression Limiter in einer Baugruppe oder mehrere Compression Limiter in mehreren Baugruppen gleichzeitig, um die Produktivität zu erhöhen. Das Schnellwechselwerkzeug des Modells CP bietet die Flexibilität, die Plattform innerhalb von Sekunden an eine Vielzahl von Produkten anzupassen. Das Modell CP hat einen Arbeitsbereich von 230 mm x 280 mm und ist auf einem stabilen Stahlrahmen mit hochpräzisen Wellen und Linearlagern aufgebaut, die einen reibungslosen Betrieb, präzise Positionierung, Wiederholbarkeit und Langlebigkeit gewährleisten. Das Modell CP ist mit optionalen Erweiterungsfunktionen erhältlich. Diese sorgen für Fehlersicherheit und maximale Effizienz.

This versatile tool is ideally suited for low to moderate levels of production for assemblies that require installation forces up to 22.2 kN (5,000 lbs). The Model PMX Extra Heavy Manual Pin Inserter easily accommodates quick change-overs. The fixture is simply replaced at the base of the machine, and the pin diameter is easily changed by switching the pin driving chuck. This Extra Heavy Duty Manual Pin Inserter will provide smooth operation, repeatability and durability.